|
PIG IRON
================================================
We have sources from
Ukraine and Russian
federation as we
work closely with
major pig iron producers
at C.I.S. that
enables us to
manage prompt shipments
throughout the Ukrainian ports where our
local office coordinate
all logistics. The chemical analysis of the
main grades are
as follows ;
|
CHEMICAL ANALYSIS OF BASIC
AND NODULAR PIG IRONS FM C.I.S.
|
|
Elements
|
C
|
Si
|
Mn
|
S
|
P
|
Cu
|
V
|
Ti
|
Cr
|
Pb
|
|
Grades
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
|
Basic 1
|
3,5 - 4,5
|
1,0 max
|
0,09 max
|
0,05 max
|
0,12 max
|
0,03 max
|
0,01 max
|
0,04 max
|
0,06 max
|
-
|
|
Basic 2
|
3,5 - 4,5
|
0,5 – 1,2
|
0,10 max
|
0,03 max
|
0,12 max
|
0,03 max
|
0,01 max
|
0,04 max
|
0,03 max
|
-
|
|
Nodular 1
|
3,5 - 4,5
|
0,5 – 1,0
|
0,05 max
|
0,02 max
|
0,055 max
|
0,01 max
|
0,01 max
|
0,025 max
|
0,01 max
|
0,01 max
|
|
Nodular 2
|
3,5 - 4,5
|
1,0 – 1,5
|
0,05 max
|
0,02 max
|
0,055 max
|
0,01 max
|
0,01 max
|
0,025 max
|
0,01 max
|
0,01 max
|
|
Nodular 3
|
3,5 - 4,5
|
1,5 – 2,0
|
0,05 max
|
0,02 max
|
0,055 max
|
0,01 max
|
0,01 max
|
0,025 max
|
0,01 max
|
0,01 max
|
|
Nodular 4
|
3,5 - 4,5
|
2,0 – 2,5
|
0,05 max
|
0,02 max
|
0,055 max
|
0,01 max
|
0,01 max
|
0,025 max
|
0,01 max
|
0,01 max
|
Typical Ingot weigth : 12 Kg. Max.
Typical Shape : Pyramid with 1 notch.
|
CHEMICAL ANALYSIS OF FOUNDRY PIG IRONS FM C.I.S.
|
|
Elements
|
C
|
Si
|
Mn
|
S
|
P
|
Cu
|
V
|
Ti
|
Cr
|
|
Grades
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
|
L1
|
3,5 - 4,5
|
3,2 – 3,6
|
0,5 – 1,0
|
0,03 max
|
0,10 max
|
0,03 max
|
0,01 max
|
0,04 max
|
0,06 max
|
|
L2
|
3,5 - 4,5
|
2,8 – 3,2
|
0,5 – 1,0
|
0,03 max
|
0,10 max
|
0,03 max
|
0,01 max
|
0,04 max
|
0,06 max
|
|
L3
|
3,5 - 4,5
|
2,4 – 2,8
|
0,5 – 1,0
|
0,03 max
|
0,10 max
|
0,03 max
|
0,01 max
|
0,04 max
|
0,06 max
|
|
L4
|
3,5 - 4,5
|
2,1 – 2,4
|
0,5 – 1,0
|
0,03 max
|
0,10 max
|
0,03 max
|
0,01 max
|
0,04 max
|
0,06 max
|
|
L5
|
3,5 - 4,5
|
1,6 – 2,0
|
0,5 – 1,0
|
0,03 max
|
0,10 max
|
0,03 max
|
0,01 max
|
0,04 max
|
0,06 max
|
|
L6
|
3,5 - 4,5
|
1,2 – 1,6
|
0,5 – 1,0
|
0,03 max
|
0,10 max
|
0,03 max
|
0,01 max
|
0,04 max
|
0,06 max
|
Typical Ingot weigth : 15 Kg. Max.
Typical Shape : Pyramid without notches.
STEEL BILLETS
================================================
Sources
For Square Steel Billets, it is
possible to deliver various qualities (Steel Qualities & Grades) from various
origins thru our accredited producing plants, such as
RUSSIA, TURKEY and UKRAINE or any other origins. Therefore,
customer should indicate Steel Quality, Grade and Length
requirements in their inquiry to enable
Steel Standards
Square Steel Billets in the following Steel Standards are
available at any occasion; GOST [Russian Standards], DIN
[German Standards], TS [Turkish Standards], ASTM + SAE
[American Standards], JIS [Japanese Standards], NFA [French
Standards] such as GOST 380, DIN 488, DIN 17100, TS 708,
ASTM A-615, JIS 3112, NFA 35-016.
Dimensions for CIS Origin Square Steel Billets:
CIS origin Square Steel Billets are available in various sizes
as follows;
|
45 mm x 45
mm
|
100 mm x 100 mm
|
|
50 mm x 50
mm
|
115 mm x 115 mm
|
|
60 mm x 60
mm
|
120 mm x 120 mm
|
|
80 mm x 80
mm
|
125 mm x 125 mm
|
|
90 mm x 90
mm
|
150 mm x 150 mm
|
Lengths of the Square Steel Billets are varying between 4
– 11,7 meters, which length requirements should be indicated
under each inquiry for our re-confirmation depending to
our accredited producers production availability.
Length tolerance: +/- 100 mm for any length. Other technical
tolerances and characteristics shall be provided on request.
Chemical Compositions
for CIS origin Square Steel Billets:
|
CHEMICAL ANALYSIS FOR C.I.S. SQUARE
STEEL BILLETS
|
|
Steel Quality
|
GOST 380
|
|
Steel Grades
|
1KP
|
1PS
|
1SP
|
2KP
|
2PS
|
2SP
|
3KP
|
3PS
|
3SP
|
5SP
|
|
Elements
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
|
C
|
0,06-0,12
|
0,06-0,12
|
0,06-0,12
|
0,09-0,15
|
0,09-0,15
|
0,09-0,15
|
0,14-0,22
|
0,14-0,22
|
0,14-0,22
|
0,28-0,37
|
|
Mn
|
0,25-0,50
|
0,25-0,50
|
0,25-0,50
|
0,25-0,50
|
0,25-0,50
|
0,25-0,50
|
0,30-0,60
|
0,40-0,65
|
0,40-0,65
|
0,50-0,80
|
|
Si
|
0,05 Max
|
0,05-0,17
|
0,12-0,30
|
0,07 Max
|
0,05-0,17
|
0,12-0,30
|
0,07 Max
|
0,05-0,17
|
0,12-0,30
|
0,15-0,35
|
|
S
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
|
P
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
|
Cu
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
|
Cr
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
|
Ni
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
|
As
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
|
CHEMICAL ANALYSIS FOR C.I.S. SQUARE
STEEL BILLETS
|
|
Steel Quality
|
GOST 1050
|
GOST 9045
|
|
Steel Grades
|
5KP
|
08
|
08KP
|
08PS
|
08JU
|
08KP
|
08PS
|
|
Elements
|
%
|
%
|
%
|
%
|
%
|
%
|
%
|
|
C
|
0,06 Max
|
0,05-0,12
|
0,05-0,11
|
0,05-0,11
|
0,07 Max
|
0,10 Max
|
0,09 Max
|
|
Mn
|
0,40 Max
|
0,35-0,65
|
0,25-0,50
|
0,35-0,65
|
0,20-0,35
|
0,25-0,45
|
0,20-0,40
|
|
Si
|
0,03 Max
|
0,17-0,37
|
0,03 Max
|
0,05-0,17
|
0,03 Max
|
0,03 Max
|
0,04 Max
|
|
S
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,025 Max
|
0,030 Max
|
0,030 Max
|
|
P
|
0,035 Max
|
0,035 Max
|
0,035 Max
|
0,035 Max
|
0,020 Max
|
0,025 Max
|
0,025 Max
|
|
Cu
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
|
Cr
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
|
Ni
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
|
As
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
|
CHEMICAL ANALYSIS FOR C.I.S. SQUARE
STEEL BILLETS
|
|
Steel Quality
|
GOST 5058
|
|
Steel Grades
|
35GS
|
18G2S
|
25G2S
|
20HG2S
|
|
Elements
|
%
|
%
|
%
|
%
|
|
C
|
0,30-0,37
|
0,14-0,23
|
0,20-0,29
|
0,19-0,26
|
|
Mn
|
0,80-1,20
|
1,20-1,60
|
1,20-1,60
|
1,50-1,90
|
|
Si
|
0,60-0,90
|
0,60-0,90
|
0,60-0,90
|
0,40-0,70
|
|
S
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
0,04 Max
|
|
P
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
0,05 Max
|
|
Cu
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
|
Cr
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,90-1,20
|
|
Ni
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
0,30 Max
|
|
As
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
0,08 Max
|
Supply sources
For Square Steel Billets, it is possible to deliver various qualities
(Steel Qualities & Grades) from various origins thru
our accredited producing plants, such as RUSSIA, TURKEY
and UKRAINE or any other origins. Therefore, customer
should indicate Steel Quality, Grade and Length requirements
in their inquiry to enable us to fix and inform them for
our proposed Origin and Mill Names.
STEEL SHEETS & PLATES
================================================
General-purpose rolled products
Hot-rolled
products of commercial quality carbon steel (with carbon
content not more than 0.15%) are manufactured in conformity
with ASTM A569/A569M, ASTM A635/A635M, DIN 1614 g.1 and
JIS G3131. They are designed for manufacturing items by
bending, moderate forming or stamping as well as by welding.
Range of products
|
Standard
|
Steel Grade
|
Thickness, mm
|
Width, mm
|
Tolerances as per dimensions and shape of rolled
products
|
|
ASTM A569/A569M
|
1008, 1010, 1015
|
Over 1.2-12.0, incl.
|
1219
|
A563/A563M, A749/A749M, A568/A568M
|
|
ASTM A635/A635M
|
1008
|
4.5-12.0
|
Over 1200
|
ASTM A635/A635M
Rolled product delivery within 50% tolerance
field is provided for 90% of the strip length,
if so required by a customer
|
|
6.0-12.0
|
300-1200
|
|
DIN 1614 G.1
|
St22
|
DIN 1016
|
DIN 1016
|
DIN 1016
|
|
JIS G3131
|
SPNC
|
1.2-12.0
|
950-1850
|
JIS G3131
|
According to ASTM A659/A659M.
Hot-rolled product of commercial quality carbon
steel (carbon content: from 0.16 to 0.25%, max.) to be
produced according to ASTM A659/A659M.
To be delivered in coils or cut to length.
Carbon content may vary from 0.15 to 0.25 %, Manganese
соntent should not exceed 0.90%.
The rolled products are to be ordered as per chemical
composition.
General characteristics
Hot-rolled flat products
of ordinary quality steel are applied for manufacture
of steel structures for industrial and public construction,
in machine building and in transport.
Chemical composition of this steel is specified
in GOST 380-94, mechanical properties of the products
under 4.0 mm in thickness are specified in GOST 16523-97,
those of the products 4.00 mm in thickness are specified
in GOST 14637-89.
The steel grades given below are analogous to
some widespread types of steel produced in conformity
with national standards of Germany, USA, GB and other
countries.
Standards
|
Standards Identification
|
|
GOST 14637-89
GOST 16523-97
|
EN 10025 (93)
|
DIN 17100
|
ASTM 570
|
JIS G3101
|
BS 4360
|
|
St2ps, St2sp
|
S235JR
|
St 37-2
|
-
|
-
|
-
|
|
St3ps, St3sp
|
S235JRG2
|
RSt 37-2
|
Gr. 36
|
-
|
40B
|
|
St3ps, St3sp
|
S235J0
S235JRG3
|
St 37-3
|
Gr. 36
|
-
|
40D
|
|
St3Gps, St3Gsp
|
-
|
-
|
-
|
-
|
-
|
|
St4ps, St4sp
|
S275JR
|
St 44-2
|
Gr. 40
|
SS 400
|
43B
|
|
St4ps, St4sp
|
S275J0
S275JRG3
|
St 44-3
|
-
|
SS 400
|
43C
|
|
St5ps, St5sp
|
E295
|
St 50-2
|
-
|
SS 490
|
-
|
Chemical Composition
|
Standard
|
Steel Grade
|
Fraction of total mass, (%)
|
|
C
|
Mn
|
Si
|
P max
|
S max
|
Cr max
|
Ni max
|
Cu max
|
|
GOST 380-94
GOSТ 14637-89
|
St2ps
|
0.09-0.15
|
0.25-0.50
|
0.05-0.15
|
0.04
|
0.05
|
0.30
|
0.30
|
0.30
|
|
St2sp
|
0.15-0.30
|
|
EN 10025
|
S235JR
|
0.20 max
|
1.40 max
|
-
|
0.045
|
0.045
|
-
|
-
|
-
|
|
GOSТ 380-94
GOSТ 14637-89
|
St3ps
|
0.14-0.22
|
0.40-0.65
|
0.05-0.15
|
0.04
|
0.05
|
0.30
|
0.30
|
0.30
|
|
St3sp
|
0.15-0.30
|
|
GOST 380-94
GOSТ 14637-89
|
St3Gps
|
0,.14-0.22
|
0.80-1.10
|
0.15 max
|
0.04
|
0.05
|
0.30
|
0.30
|
0.30
|
|
St3Gsp
|
0.14-0.20
|
0.15-0.30
|
|
DIN 17100
|
RSt 37-2
|
0.17 (1)
0.20 (2)
|
-
|
-
|
0.050
|
0.050
|
-
|
-
|
-
|
|
EN 10025
|
S235JRG2
|
0.17 max
|
1.40 max
|
-
|
0.045
|
0.045
|
-
|
-
|
-
|
|
ASTM A570
|
Grade 36
|
0.25 max
|
0.90 max
|
-
|
0.035
|
0.40
|
-
|
-
|
0.20
|
|
BS 4360
|
40B
|
0.17 max
|
1.40 max
|
-
|
0.045
|
0.045
|
-
|
-
|
-
|
|
DIN 17100
|
St 37-3
|
0.17 max
|
-
|
-
|
0.040
|
0.040
|
-
|
-
|
-
|
|
EN 10025
|
S235J0
|
0.17 max
|
1.40 max
|
-
|
0.040
|
0.040
|
-
|
-
|
-
|
|
EN 10025
|
S235J2G3
|
0.17 max
|
1.40 max
|
-
|
0.035
|
0.035
|
-
|
-
|
-
|
|
BS 4360
|
40D
|
0.17 max
|
1.40 max
|
-
|
0.035
|
0.035
|
-
|
-
|
-
|
|
GOSТ 308-94
GOSТ 14637-89
|
St4ps
|
0.18-0.27
|
0.40-0.70
|
0.05-0.15
|
0.04
|
0.05
|
0.30
|
0.30
|
0.30
|
|
St4sp
|
0.15-0.30
|
|
EN 10025
|
S275JR
|
0.21 max
|
1.50 max
|
-
|
0.045
|
0.045
|
-
|
-
|
-
|
|
DIN 17100
|
St 44-2
|
0.21 max
|
-
|
-
|
0.050
|
0.050
|
-
|
-
|
-
|
|
ASTM A570
|
Grade 40
|
0.25 max
|
0.90 max
|
-
|
0.035
|
0.40
|
-
|
-
|
0.20
|
|
JIS 3101
|
SS 400
|
-
|
-
|
-
|
0.050
|
0.050
|
-
|
-
|
-
|
|
BS 4360
|
43B
|
0.21 max
|
1.50 max
|
-
|
0.045
|
0.045
|
-
|
-
|
-
|
|
EN 10025
|
S275J0
|
0.18 max
|
1.50 max
|
-
|
0.040
|
0.040
|
-
|
-
|
-
|
|
EN 10025
|
S275J2G3
|
0.18 max
|
1.50 max
|
-
|
0.035
|
0.035
|
-
|
-
|
-
|
|
DIN 17100
|
St 44-3
|
0.20 max
|
-
|
-
|
0.040
|
0.040
|
-
|
-
|
-
|
|
BS 4360
|
43C
|
0.18 max
|
1.50 max
|
-
|
0.040
|
0.040
|
-
|
-
|
-
|
|
GOSТ 308-94
GOSТ 14637-89
|
St5sp
|
0.28-0.37
|
0.50-0.80
|
0.15-0.30
|
0.04
|
0.05
|
0.30
|
0.30
|
0.30
|
|
St5ps
|
0.05-0.15
|
|
DIN 17100
|
St 50-2
|
0.30 max
|
-
|
-
|
0.050
|
0.050
|
-
|
-
|
-
|
|
JIS G3101
|
SS 490
|
-
|
-
|
-
|
0.050
|
0.050
|
-
|
-
|
-
|
|
EN 10025
|
S275J2G3
|
0.18 max
|
1.50 max
|
-
|
0.035
|
0.035
|
-
|
-
|
-
|
|
EN 10025
|
S355K2G3
|
0.20 max
|
1.60 max
|
0.55 max
|
0.035
|
0.035
|
-
|
-
|
-
|
|
EN 10025
|
S355JR
|
0.24 max
|
1.60 max
|
0.55 max
|
0.045
|
0.045
|
-
|
-
|
-
|
Notе: Chemical composition and mechanical
properties of steel grades 40B, 40D, 43B, 50D, 50B under
BS 4360 fully comply with EN 10025 (93) requirements.
STEEL SCRAP
================================================
Specifications;
Maximum Size : 1500 x 500 x 500 mm
Minimum Thickness: 4 mm
Up to 70
% of each lot over 6mm, up to 27 % of each lot between
4 to 6 mm and up to 3 % of each lot below 4 mm thickness.
Oversize Tolerance: 3 % max
Max 2 %
of each lot up to 1700 x 600 x 600 mm dimensions and max
1 % of each lot over 1700 x 600 x 600 mm dimensions
Maximum Piece Weight: 500 kg.
A tolerance
of 1 % to apply for any lot
Minimum Piece Weight: 1 kg.
A tolerance
of 1 % to apply for any lot
Cast Iron: 3 % max.
The quantity
of any Cast Iron [such as motor blocks, engines etc.)
and the quantity of any Pig Iron (such as pig radiators
etc.) will not exceed 3.00 % of total shipped quantity
of each lot.
Impurities: 3 % max.
In general, percentage of impurities
in our Scrap Lots does not exceed 1 %.
Harmful Impurities: The scrap does not include non-ferrous
metals scrap and wastes, rubber contaminations, rubber
wheels, tires.
Harmless
Impurities: Scrap lots do not include any Slag, Dross and/or Pig Wastes.
The scrap does not include any arc furnace, blast furnace
or open-heart furnace wastes. Littering
by harmless impurities such as Sand, Soil, Wooden Chips,
Stones & Crashed Stones, Dust does not exceed GOST
2787-75 requirements, however with a max tolerance of
3 % to be allowed.
Without explosive items.
Iron &
Steel Scrap lots traded are EXPLOSION PROOF.
* Scrap lots does not include Gas Cylinders, Gas Balloons, Fuel
Containers or any type of Sealed Containers,
*
Explosives,
Shells, Bombs, Torpedoes, Mines or any types of Ammunitions
( even if they emptied and/or their fuses are taken out
) and
* Inflammable materials.
We provide
certification issued by a competent official authority
or a neutral independent inspection company
report , for surveys effected at loading port before
and during loading.
We do not deliver
- Bundles
- Pressed
Scrap
- Electrical
Motors, Startors & Rotors with Non-Ferrous Metals
content inside
Ecologically clean.
Iron &
Steel Scrap lots are Ecologically pure, not exceeding
the level of radiation allowed by the existing norms to
process the scrap for re-melting.
We provide
Non – Radioactivity Certificate
issued by a competent official authority or a neutral
independent inspection company report for surveys effected
at loading port before and during loading.
|
